At Master Craft Wood Turnings, we manufacture a large variety of wholesale wooden dowel rods, at our shop in Kitchener, Ontario, Canada. Our wooden dowel rods come in 17 different diameters, anywhere from 1/8” to 1 7/8”. Stock lengths are 4ft., 6 ft., and 8ft. We can even provide non-stock sizes of up to 16 feet if the customer supplies the lumber. We can produce metric sizes as a custom order if quantities justify it.
We stock soft maple dowel, and some sizes in oak and poplar. We can supply any size larger than 7/16″ in most domestic hardwoods and pine, including walnut, ash , hard maple, and cherry.
We have the capability of adding tenons, points, and bull noses (or roundovers) to the ends of the dowels. We ship coast to coast in Canada. We can supply our dowel “retail ready” with UPC labels, and color endpaint to identify sizes. Smaller bundle sizes are available for private retailers.
OEMs and industrial customers may be interested in our large supply of cut-offs and shorts at an attractively reduced price. Call us with your needs, and we’ll cut you a deal!
Available Sizes: Sanded, Sized from 1/8″ to 1 7/8″.
Stock Sizes: 4 ft, 6 ft, 8 ft – Lengths up to 16 ft available if customer supplies the lumber.
Stock Material: Soft Maple.
Wooden Dowel Pins
We stock the most common imperial and metric sized multi-groove dowel pins in carton quantities. The pins are birch, and have good size tolerance and the pricing is very competitive. We can order less common sizes for you, with a 2-3 week turnaround usually.
Multi- Groove , Birch Pins in Imperial and Metric sizes.
Most common sizes are stock.
Interior Decorative Flagpoles (Custom Ordered)
Our wooden flagpoles are custom made to match each customer’s individual requirements. We offer many different species of wood for customers to choose from. Most poles are 8 ft. , made in two 4ft sections. We tenon the ends to custom fit the brass connectors that you supply us, to ensure a perfect fit. Typically, the bottom end is bull-nosed, and the top tenoned to accept your topper. We finish your pole to a 150 grit sanding, then colourmatch stain to your specifications, seal, and spray lacquer to a bright finish.
Two different diameters are available; the 1″ x 8 ft straight pole, and the 1 1/4″ x 8ft pole, which has the top section taper from 1 1/4″ to 1″, with a 7/8″ tenon. Our poles were featured at the G20 summit.
Available Sizes: 1 inch x 8 ft, 1 1/4 inch by 8 ft.
Can manufacture custom sizes and species.
Various Species Available.
Custom Tenonned to fit Customer’s Hardware.
Round-Over on bottom.
If you have any questions about these items, contact us today at 519-579-5080 or stop by our shop in Kitchener, Ontario.